3.13. Edit a Named Usage Policy

The next steps after assigning a name and Policy type to a Usage Policy is providing the amount of data the Policy will permit at run time. To find more information on usage limits, which include Rate Limiting and Throttling, visit: Usage Limits.

In this Section:

1. Edit a Named Usage Policy
2. Edit a Usage Policy Name
3. Send a Named Usage Policy for Approval
4. Mark a Usage Policy for Deprecation
5. Submit a Usage Policy for Retirement
6. Open an Approved or Published Usage Policy for Editing
7. Discard Changes after opening a Usage Policy for Editing
8. Search a Usage Policy

Before you begin:

• It is assumed that you have completed the tasks enumerated in the earlier section.
• The Usage Policy screen, being context sensitive, displays only those fields that are relevant to the type of Usage Policy selected.
• The right panel of the Usage Policy screen has the Impacted Plans table that displays a list of Usage Plans that the Policy in the left panel enforces.
• The tasks in this section has mentions of K and M as the unit of Request Count. K stands for kilo, the Latin word for 1000 (a thousand) and M stands for 1,000,000 (a million).
• The fields marked with asterisks are mandatory.

Depending on the context, one of the two UI screens below could be referenced in this section:

• Request Limit

  

  Fig. 3.307 Request Count Limit

• Traffic Throttle

  

  Fig. 3.308 Traffic Throttle

Common Tasks

Following are the common tasks identified in this section:

• Navigating to the Usage Policies List screen

  To navigate to the Usage Policies List screen:

  • In the main Navigation menu, click Usage Policies. The Usage Policies list screen displays.
  

  Fig. 3.309 Usage Policies list screen

• Navigating to the Usage Policy screen

  To navigate to the Usage Policy screen:

  1. Navigate to the Usage Policies List screen.
  2. In the Usage Policies list screen, click the row that has the Usage Policy that you want to edit. The Usage Policy screen displays. Being context-sensitive, the Usage Policy screen that displays are different for Request Count Limit and Traffic Throttle Usage Policies.

3.13.1. Edit a Named Usage Policy

To edit a Named Usage Policy:

1. Navigate to the Usage Policy screen.
2. Fill the fields as stepped out below:

Request Count Limit:

1. In the Number of Request box, type an amount to specify the M or K of data.

   

   Fig. 3.310 Number of Requests allowed

2. Click to select Limit Unit drop-down box below the Number of Request box to specify the unit (M or K) that is used to measure the Request Counts.

   

   Fig. 3.311 Request unit

3. Click the Time unit drop-down box to select the unit of time for which the data volume is applicable. The options for units of time are sec (for seconds), min (for minutes), and hr (for hours).

   

   Fig. 3.312 Time unit

4. Click to select the check box Enforce only during below timings to restrict the policy to the specified time duration of the day.

   

   Fig. 3.313 Enforce timings

5. In the Start time box, type the start time, and in the End time box, the end time to specify the time duration for which you want to enforce the policy. Ignore this step if you left the check box Enforce only during below timings unchecked.

   Note

   Type the time in HH:MM:SS 24-hour clock format.

6. The Select Production Gateway you want to map drop-down displays the list of Production Gateways that are configured for the publisher organization. The Select Sandbox Gateway you want to map drop-down displays the list of Sandbox Gateways that are configured for the publisher organization. From the drop-down, choose the Production/Sandbox Gateway to which you want to map the Usage Policy. The Gateways you select will appear at the top of the drop-down. You can remove the selected Gateways by clicking the .

   

   Fig. 3.314 Gateway to Map

   Note

   The Usage Policy will be mapped only to the selected Gateways. If a Plan has a dependency on Usage Policy then that Usage Policy will also be mapped along with the Plan.

   You can also map the Usage Policy from the Usage Policy tab of the selected Gateway. Refer Usage Policy.

7. Click Save As Draft to save changes.

Traffic Throttle:

1. In the Number of Request box, type an amount to specify the M or K of data.

   

   Fig. 3.315 Number of Requests

2. In the Limit Unit drop-down box, click to select M or K from the drop-down list to specify the unit for measuring Request Count.

   

   Fig. 3.316 Limit unit

3. Repeat steps 3 to 6 from the earlier task: Request Count Limit.

   Note

   Traffic Throttle has only sec (seconds) and min (minutes) as time units.

   Note

   You can make changes to a Named Usage Policy that has a Draft State.

   Note

   Upon any changes in the artifacts, the artifacts needs to be repropagated.

3.13.2. Edit a Usage Policy Name

You can edit to change the name of a Usage Policy whatever the State of the Usage Policy.

To edit a Usage Policy name:

1. Navigate to the Usage Policy screen.

   The Plans Associated panel on the right of your screen displays a list of all Usage Plans currently associated with the Policy.

2. In the Usage Policy screen, click the Usage Policy Action icon . The Usage Policy Action menu displays.

3. In the Usage Policy Action menu, click Edit Policy Name to display the Edit Policy Name dialog box.

   

   Fig. 3.317 Edit Policy Name dialog

4. Make the necessary changes and click Update to save changes and close the dialog box.

   

   Fig. 3.318 Update changes

3.13.3. Send a Named Usage Policy for Approval

Once you are done with creating and editing a Named Usage Policy, the next step is to send it for approval so that after approval it can be assigned to a Plan. Note that approval request is applicable only if the automatic approval workflow is disabled for usage policies under Global Configurations.

To publish a Named Usage Policy:

1. Navigate to the Usage Policy screen.

2. Click the Usage Policy Action icon . The Usage Policy Action menu displays.

   

   Fig. 3.319 Usage Policy Action menu

3. Click to select Submit for Approval to send the Usage Policy for approval. The state of the Usage Policy changes from Draft to Submitted for Approval

   A Publisher user has to approve the Named Usage Policy for it to be approved and put to use. Once the Publisher user approves the policy, its State changes from Submitted for Approval to Approved. After completing the gateway sync procedure for the Usage Policy, the state changes to Published.

   Approved or Published Policies can be attached to Usage Plans to control the incoming traffic that access resources/operations connected to the Plans.

   An Approved or Published Named Usage Policy displays in the Gateway Sync>Changes screen ready to be propagated to the Gateway and made operational.

3.13.4. Mark a Usage Policy for Deprecation

A deprecated Usage Policy is not available for assigning to a new Usage Plan. If an approved or Published Usage Policy that has been attached to a Usage Plan and has active subscribers is marked for deprecation, it will remain enforceable until the end of the subscription validity period.

You can deprecate a Named Usage Policy only if it has an Approved or Published State.

To deprecate a Usage Policy:

1. Navigate to the Named Usage Policy screen.

2. Click the Usage Policy Action icon . The Usage Policy Action menu displays.

3. Click Mark as Deprecated to submit the open Usage Policy for deprecation.

   

   Fig. 3.320 Open Usage Policy for deprecation

   The State of the Usage Policy changes from Approved or Published to Submitted for Deprecate.

   Once a Publisher user approves the policy submitted for deprecation, the state in the policy screen changes from Submitted for Deprecate to Deprecated.

3.13.5. Submit a Usage Policy for Retirement

You can send a Named Usage Policy for retirement if the Usage Policy is in its Deprecated State. Once a Policy is Retired, it will not available for attaching to a Usage Plan. You cannot send a Deprecated Usage Policy for retirement if it is associated with a Usage Plan.

To retire a Usage Policy:

1. Navigate to the Named Usage Policy screen.

2. Click the Usage Policy Action icon . The Usage Policy Action menu displays.

3. Click Submit for Retire to submit the currently open Usage Policy for retirement.

   

   Fig. 3.321 Usage Policy for retirement

   The state of the Usage Policy changes from Deprecated to Submitted for Retire.

   Once the Publisher user approves the policy submitted for retirement, the State of the Usage Policy changes from Submitted for Retire to Retired.

3.13.6. Open an Approved or Published Usage Policy for Editing

Since a Usage Policy after its approval becomes available for attaching to Usage Plans, editing or making changes directly is not permitted. In cases where it becomes necessary to make changes to an Approved or Published Usage Policy, you need to use the Open for Editing option available from the Usage Policy Action menu.

To open an Approved or Published Usage Policy for editing:

1. Navigate to the Named Usage Policy screen.

2. Click the Usage Policy Action icon . The Usage Policy Action menu displays.

3. Click Open for Editing to submit the currently open Usage Policy for edit.

   

   Fig. 3.322 Open Usage Policy for edit

   The State of the Usage Policy changes from Approved to Approved. Awaiting Approval for Editing.

   Once the Publisher user approves the Usage Policy, the State of the Policy changes to Draft, which allows you to edit the Policy.

   Once you are done with making changes to the Usage Policy, submit the Policy for Approval. After the Approval, the Usage Policy State changes to the Approved State.

   To make the changes operational, complete the tasks in the section: Synchronize Changes. After synchronizing the state in the Usage Policy changes to Published.

3.13.7. Discard Changes after opening a Usage Policy for Editing

You can discard the draft and revert to earlier Approved or Published Usage Policy if you change your mind about making any revision for the policy.

To Discard the Draft after opening a Usage Policy for edit:

1. Navigate to the Named Usage Policy screen.

2. Click the Usage Policy Action icon . The Usage Policy Action menu displays.

3. Click Discard Draft to submit the request for discarding the draft Usage Policy.

   

   Fig. 3.323 Discarding the draft Usage Policy

   The Usage Policy State reverts to the Approved or Published state and the approved or published Usage Policy is restored.

3.13.8. Search a Usage Policy

The user can search for a Usage Policy using the Search feature present in the Usage Policies page. To learn more about the Search feature, refer the topic: Search

The search results page displays matches for the search from the following Usage Policy components:

• Usage Policy name
• Associated pack names
• Associated usage plan names
• Number of Requests in Policy detail page

To search a Usage Policy:

1. Navigate to the Usage Policies page.

2. In the search box, type in the keyword(s) for starting a search on a Usage Policy or one of its components.

   

   Fig. 3.324 Search box

3. Click the Search icon to display the search results.

   

   Fig. 3.325 Search Results

   Each entry in the Search result page takes the following format for displaying matches:

   <Usage Policy Name>
   <matches>...
   

   For example, a search for the word ‘primary’ in the Usage Policies screen returns:

   Full Day Primary Policy
   Approved
   Policy Name: Full Day Primary Policy
   

Next Steps

In the next section, we will take you through the steps necessary to export and import Named Usage Policies.